British Columbia Commercial Drivers License Air Brakes Practice Test 1

Commercial Driver HQ is a website focused on helping new commercial drivers in all provinces and territories in Canada.

Our FREE practice tests are designed to help you succeed when it comes time to write the real test.

Each license type has 5 tests to help you study and become familiar with the rules and regulations of commercial driving. The tests are not identical to the license test you will need to pass, but the questions are similar to what you will find on the real deal.

Compatible on desktop, mobile, and tablet, you can take these tests anywhere you have internet access.

Take the practice test!

0%
Created by Commercial Driver HQ

British Columbia Air Brakes Practice Test 1

A 20 question practice test to help prepare you for your air brakes knowledge test in BC

1 / 20

If brake chambers on opposite side of an axle are different sizes, this may cause?

2 / 20

Test the low pressure alarm with the air pressure above __________.

3 / 20

If the outer layer of an airline is damaged, but the inner layer is ok, what should you do?

4 / 20

You should be looking for this when checking your brake chambers?

5 / 20

When brakes become overheated they also become?

6 / 20

To make sure the air tanks are securely attached to the vehicle you should?

7 / 20

When can you adjust your own air brakes?

8 / 20

What is the best way to inspect an air compressor?

9 / 20

What is the most frequent reason a vehicle is removed from service?

10 / 20

When inspecting your brakes, you must?

11 / 20

Before inspecting for air brake chamber leaks, you must __________.

12 / 20

The supply tank should discharge more moisture than any other tank?

13 / 20

A commercial vehicle with air brakes engaged must not lose air pressure faster than?

14 / 20

When you are testing your spring brakes, the test is considered a success when?

15 / 20

You test a tractor protection valve by removing the service line and?

16 / 20

How long should it take for the air pressure to rise from 587kPa to 690 kPa after the pressure had fallen below 552 kPa?

17 / 20

System air loss should be measured by applying the brake for how long?

18 / 20

How much air loss is allowed for a tractor and a trailer when the brakes are engaged?

19 / 20

Where is the brake lining fastened?

20 / 20

To measure the time it takes to build up pressure in the air system, the engine should be idling between _______________.

Thanks for taking the practice test!

Enter your info to sign up for our mailing list or click "See Result" to move on.

Your score is

The average score is 71%

LinkedIn Facebook Twitter VKontakte
0%

More British Columbia Commercial Driving Practice Tests

Air Brakes Practice Tests

BC Class 1 Practice Tests

BC Class 3 Practice Tests

BC Class 4 Practice Tests

BC Road Signs Test

We do our best to keep the questions current and accurate. The testing centres may change the questions on the knowledge tests at any time. Always be prepared for surprises.

Many of the answers to the questions can be found in the driver hand books or learning materials your province provides.

DISCLAIMER: CDHQ is not affiliated with the provinces or any test centres. These practice tests should not be considered official tests and you are not granted a license for completing them. Our tests are simply a practice tool to help prepare yourself for the real test.